series displays are modular flow display centers that convert ONICON
insertion and inline flow meters into complete flow monitoring stations.
The wall-mounted modules display the current
flow rate and total and provide a low voltage DC power source capable
of powering most ONICON inline and insertion flow meters.
The versatile display module can be located close to the flow meter or up to several hundred feet away. Using the flow meter with the display module will also allow you to support other remote devices such as BTU meters, building control systems, and data acquisition systems.
Electronics Enclosure: Steel NEMA 4 wall mount, 6” x 6” x 4”
Note: Enclosure varies dependent on number of displays
Input power: Standard: 24 VAC 50/60 Hz, 750 mA max*
Optional: 120 VAC 60 Hz, 250 mA max
Optional: 230 VAC 50 Hz, 125 mA max
*Maximum current varies with flow meter model and number of displays
INTERNAL POWER SUPPLY
Provides 24VDC, 250 mA maximum to electronics and flow sensor
Numeric LCD displays, 0.46” high digits
Rate: 6 digits (“R” indicates rate)
Total: 8 digits (Overflow indication provided)
FLOW SIGNAL INPUT/OUTPUT
Input: DC pulse/frequency or dry contact output from ONICON insertion or inline flow meters
Output: Additional output signal(s) ordered with flow meter are available for connection to control system via the display module terminal strip.
Factory programmed for specific application
Field programmable via front LCD interface
Non-volatile EEPROM memory retains data in the event of power loss.
Operating temperature range: -20° to 140°F
Operating humidity range: 0 to 85% RH (Non-condensing)
• HVAC chilled water, condenser water, and heating hot water flow monitoring
• Domestic water flow monitoring
• Municipal water flow monitoring
FLOW METER MODELS SUPPORTED
|Flow Meter Models||Display Options|
|F-1000 Series Turbine||Rate & Total|
|F-3500 Insertion Electromagnetic||Rate & Total|