WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate, economical reading of high flows with low pressure loss. The horizontal-axis turbine drives a vertical shaft, which is magnetically coupled to the sealed register.
In addition to mechanical totalizing, registers can be equipped with magnetic pulse reed sensors well suited for remote totalizing, pacing of electronic metering pumps, and water treatment applications.
Bodies are manufactured of tough cast iron and epoxy-coated for protection. Tungsten steel shafts and jewel bearings further enhance the durability of these meters. Simple removal of the top flange brings out all parts for inspection, repair, or replacement. The meter has a tamper-evident seal to call attention to unauthorized access.
Compatible Seametrics controls include the PT35 pulse timer, the PD10 pulse divider, and the PS40 pulse splitter for running multiple pulse-responsive devices (e.g. pumps, counter timers and remote totalizers) with a single WJ meter
Feature WJ Series
- Non-resettable mechanical totalizer
- 2, 3, 4, 6, 8” pipe sizes
- Optional pulse output
- Rugged construction
- Accurate and economical
|Materials||Meter Body||Cast iron, epoxy coating|
|Register Plate||ABS plastic|
|Turbine Shafts||Tungsten steel|
|Flanges||150 lb ANSI drilling|
|Maximum Pressure||150 psi (10 bar)|
|Maximum Temperature||105 ̊ F (40 ̊ C)|
|Accuracy||Above Transition¹||± 2% of reading|
|Below Transition¹||± 5% of reading|
|Reed Switch||100 mA @ 24 Vac/dc|
- Specifications subject to change. Please consult before order.
Note 1: See flow range table.
Flow Range (GPM)