SPECIFICATION :

• STYLE: Integral In-Line Mass Flow Meter
• SENSOR: Two reference-grade Platinum RTD clad in 316SS sheath
• MATERIAL: Wetted metal components: 316SS
• POWER: 24VDC Standard (12VDC or 115/230VAC optional)
• POWER DISSIPATION:
• ELECTRONICS: Microprocessor-based (Hybrid-Digital)
• ELECTRONICS ENCLOSURE: Integral mount, NEMA 4 enclosure
• DISPLAY: High contrast photo-emissive OLED graphical display (Flow Rate, Totalizer, Temperature)
• TURNDOWN: 100 to 1
• RESOLUTION: 1000 to 1
• LOW-END SENSITIVITY: 5 SFPM
• FIELD CALIBRATION CHECK: Yes – Digital system allows raw signal validation (milli-watts)
• COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
• APPROVALS: CSA C22.2 (24 VDC); ULI604, Class I, Div 2, Groups , C, D T4 (24VDC);
  CE (AC Power or 24VDC)
• FIELD RECONFIGURABLE: Sage ADDRESSER required
• FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
• FLOW REPEATABILITY: 0.2%
• RESPONSE TIME: 1 second time constant
• GAS TEMPERATURE RANGE: Standard -40° to 200°F (93°C), Optional to 300°F (149°C) and 450°F (232°C)
• GAS PRESSURE: 500 PSIG (If higher pressure needed, contact Sage)
• FLOW OUTPUT: 4 to 20 mA for Rate
• TOTALIZER: 24VDC pulse for Totalized value
• TEMPERATURE OUTPUT: Through Modbus® only
• AMBIENT TEMPERATURE: -40° to 150°F (66°C)
• FLOW BODY: 316SS Schedule 40 Flow Bodies sized from 1/4″ x 6″ long to 4″ x 12″ long.
  Male NPT ends standard (Flanges and other options available)
  RELAYS: N/A
• FLOW CONDITIONING: Flow Conditioners are built into In-Line Style Flow Bodies from 1/2″ to 4″
• ENCLOSURE DEPTH: DC: 4.35″; AC: 5.35″