Dwyer TFP-LP Series Liquid Turbine Flow Meter are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. Couple this unit with a Series TM2 Flow Totalizer for a remote flow monitoring display. A power adapter or mating cable assembly is required for operation.
Turbine sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer turbine flow transmitters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.
Dwyer TFP-LP Series Features
- These meters utilize a turbine wheel and electro-optical detection
- convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging
- Flow Totalizer for a remote flow monitoring display
| Another Article: |
Specification
| Service | Clean liquids compatible with wetted materials. |
| Wetted Materials | PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer. |
| Accuracy | ±1% of full scale. |
| Linearity | ±1% of full scale. |
| Repeatability | ±0.2% of full scale. |
| Temperature Limits | 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C. |
| Pressure Limits | 100 psig (6.8 bar). |
| Process Connection | Compression fitting |
| Power Requirements | 11.5 to 15 VDC. |
| Power Consumption | 35 mA @ 12 VDC. |
| Output Signal | 0 to 5 VDC: Minimum 2.5 kΩ load; Pulse: 7.5 VDC peak buffered square wave. |
| Electrical Connections | Four-pin power and signal connector. A power adapter or mating cable required for operation. |
| Enclosure Rating | IP10 (NEMA 1). |
| Weight | 0.19 lb (85 g). |
| Agency Approvals | CE. |
Download Data Sheet: Series TFP-LP Liquid Turbine Flow Meter
Ref: dwyer-inst.com
Flow Meter Liquid and Gas Indonesia 