The FMG series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters are MID approved and fully comply with EN12480 and OIML R137. The compact exchangeable aluminum cartridge allows local repair and on-site cleaning.
The robust design of the casing and the cartridge make the meter less sensitive to installation stresses caused by the connecting piping. A significant amount of misalignment of the connecting piping/flanges can be tolerated by the meter without affecting the meter performance by jamming the impellers.
The aluminum casing of the FMR (body and front plate) is designed for working pressures up to 20 bar with a safety factor of 4. The square impellers and the improved position of the main bearings and shafts, make the meter less sensitive to overload and pressure shocks.
The aluminum index and the protection of the LF pulses with the associated magnets, make the meter less sensitive for manipulation by externally applied magnets or other external forces.
Tampering of meters with strong neodymium magnets is one of the major concerns of utility companies, as this kind of manipulation is very difficult to detect or prove. To be prepared for the “smart grid”, the index can also be equipped with an intelligent encoder.
The unique proprietary oiling system, where the oil is distributed directly to the timing gears through a disc, eliminates oil loss at high rotor speeds and will lubricate the timing gears at very low loads. All plugs and oil sight glasses are in the front of the meter, allowing the meter to be installed in very compact installations.
The FMG rotary gas meter is a displacement type gas meter. The actual measurement is performed by two figure 8-shaped impellers (rotors) rotating within a measurement chamber. During a full revolution of the rotors, a fixed volume is displaced from the inlet to the outlet of the meter.
The number of revolutions represents the amount of volume passed. The volume is displayed on a direct read counter type index. Several low and high-frequency pulses can be used for flow computing or control purposes.
The FMR series of rotary meters is suitable for custody transfer gas measurement of all non-corrosive gases such as natural gas, propane, butane, air, hydrogen, etc. Typical applications are:
- Gas distribution in low, medium or high-pressure networks
- Industrial applications
- Master meters for test benches
|Metrological approvals:||Compliant with EN12480:2002|
|Compliant with EN12480:2015|
|Compliant with OIML R137 1&2 (2014)|
|Compliant with MID 2014/32/EU|
|ATEX approvals:||Sensors compliant with Ex ia IIC T4… T6 Gb (-40ºC ≤ Ta +70ºC)|
|Encoder compliant with Ex ib IIB T3… T6 Gb (-25ºC ≤ Ta +55ºC)|
|Flow rates:||0.2 m3 /h up to 1000 m3 /h|
|Nominal diameters:||From DN25 to DN200 mm (1” to 8”).|
|Mounting position:||Horizontally or vertically Body Compliant to Pressure Equipment Directive 2014/68/EU|
|Temperature Range:||ATEX: -25°C to +70°C|
|MID: -25°C to +70°C (lower temperatures on request)|
|PED: -20°C to +70°C (lower temperatures on request)|
Download Catalog: FMR Rotary Gas Meter-Flow Meter Group