Bamo DKG Viscosity Compensated Flow Controller/ Indicator the flow in pipe of a fluid free of suspended particles, having a viscosity of between 30 and 600 cSt.
Bamo DKG Viscosity Compensated Flow Controller Features:
- Operates in all positions
- Indicator, plus 1 adjustable contact
- Stainless steel and brass versions
- Pressure up to 16 bar
- Viscosity: 30 … 600 cSt
- Flow ranges from 0.1 up to 90 l/min
Operation:
The liquid drives a magnetic orifice plate inside the cylindrical measuring tube. A spring balances its movement and allows to operate in all positions. The plate is visible through the glass tube graduated in litre per minute. An adjustable Reed contact changes of status with the passage of the magnetic orifice plate. With these equipment, the DKG operates independently of the pressure, even with low flow rates.
Application:
Control and reading of flow-rate in lubrication pipings or in any compatible skids.
| Another Article: |
Bamo DKG Viscosity Compensated Flow Controller Specification:
| Pressure limits | DKG 1: 10 bar |
| DKG 2: 16 bar | |
| Temperature limits | DKG 1: -20 … 100 ° C (Option 160 ° C) |
| DKG 2: -20 … 120 ° C (Option 160 ° C) | |
| Scales unit | In l/min of lubricating oil; S.G. 0.9 |
| Viscosity | 30 … 600 cSt |
| Accuracy | ±10 % F.S. |
| Pressure loss | DKG 1: 0.02 … 0.4 bar |
| DKG 2: 0.02 … 0.2 bar | |
| Flow contact | N.O. without flow |
| Hysteresis | About 1.5 mm |
| Connector | DIN 43650 plug-in socket; IP 65 |
Brass version |
Anodized aluminum |
| Body | |
| Fittings, orifice plate | Nickel-plated brass |
| Spring | AISI 316 Ti (1.4571) |
| Seals | FPM |
| Magnet | Ferrite |
| Measuring tube | Glass DURAN® 50 |
Stainless steel version |
Anodized aluminum |
| Body | |
| Fittings, orifice plate, spring | AISI 316 Ti (1.4571) |
| Seals | FPM |
| Magnet | Ferrite |
| Measuring tube | Glass DURAN® 50 |
Download Data Sheet:Viscosity Compensated Flow Controller/ Indicator DKG
Ref: bamo.eu
Flow Meter Liquid and Gas Indonesia 