Bamo Metallic CDV Flow Controllers and Indicators is used to monitor and visualize the flow-rate of a fluid free of suspended particles.
Bamo Metallic CDV Flow Controllers and Indicators Features:
- Operates in all positions
- Flow indicators, plus 1 flow contact
- Versions: Stainless steel or brass
- Pressure max. 16 bar
- Flow ranges from 0.005 up to 150 l/min
Operation:
The fluid drives a magnetic orifice plate inside the cylindrical measuring tube. A spring balances its movement and allows to operate in all positions. The upper edge of the diver corresponds to the flow-rate on the graduated scale (in ml/min or l/min). A Reed contact, N.O. with no flow, is adjustable all along the scale, its status changes with the passage of the plate.
With these equipment, the CDV operates independently of the pressure, even in low flow rates.
Application:
Control and indication of flow-rate in cooling, high pressure pipings, dry-run pump prevention, etc.
| Another Article: |
Bamo Metallic CDV Flow Controllers and Indicators Specification:
| Pressure limits | 16 bar for fittings ¼” & ½”; 10 bar for fittings 1” | |
| Temperature | -20 … +100 °C | |
| Measuring scale unit | l/min of water at 20 °C | |
| Accuracy | ±10 % F.S. | |
| Pressure drop | 0.02 … 0.4 bar (BSP 1”) | |
| 0.2 … 0.3 bar (BSP ½”) | ||
| 0.2 … 0.2 bar (BSP ¼”) | ||
| Switch | N.O. without flow | |
| Hysteresis | About 1.5 mm | |
| Connection | DIN 43650 plug-in socket | |
Brass version |
IP 65 | |
| Anodized aluminum | ||
| Body | ||
| Fittings & orifice plate | Nickel plated brass | |
| Spring | AISI 316 Ti (1.4571) | |
| Seals | NBR | |
| Magnet | Ferrite | |
| Glass tube | Glass DURAN® 50 | |
AISI version |
Anodized aluminum | |
| Body | ||
| Fittings, orifice plate | AISI 316 Ti (1.4571) | |
| Spring | AISI 316 Ti (1.4571) | |
| Seals | FPM | |
| Magnet | Ferrite | |
| Glass tube | Glass DURAN® 50 |
Download Data Sheet: Flow Controllers and Indicators, Metallic CDV
Ref: bamo.eu
Flow Meter Liquid and Gas Indonesia 