Brainchild RSC Rail Signal Conditioner

The signal conditioner incorporates two bright easy to read LCD Displays which indicate Process Value (PV) and user-selected parameter. It is powered by an 11-26 or 90-250 VDC /VAC supply. It is fully programmable for Linear Voltage, Linear Current, PT100 and thermocouple types J, K, T, E, B, R, S, N, L, U, P, C, and D input. The input signal is digitized by using an 18-bit A to D converter. Its fast sampling rate allows the signal conditioner to retransmit the signal faster. It can do a maximum of 3 retransmission with one input.

Feature

The new generation of signal conditioner has a lot of unique features.The unique features are listed below.

• Optional LCD Display
• High Accuracy 18 Bit A-D Conversion
• Up to 3 retransmission outputs with 15 Bit resolution
• Fastest Sampling Rate of 200 msec
• Universal Input
• RS-485 Communication
• Event Input
• Lockout Protection
• Bidirectional Menu Navigation
• SQRT Function for PV

Another Article: The Technology of Ultrasonic Flowmeter Working Principle of Flow Meter How to Choose a Flow Meter Models and Types of Flow Meter Sound Velocity of Material Principle Working of Coriolis Mass Flow Meter

Specification

Power

• Power Supply: 90 to 250VAC, 47 to63Hz, 20 to 28 VAC,47-63Hz / 11 to 40 VDC
• Power Consumption: 10VA, 5W Maximum

Signal Input

Type	Thermocouple (J, K, T, E, B, R, S, N, L, U, P, C, D), RTD(PT100(DIN), PT100(JIS)), Current(mA), Voltage(V)
Resolution	18 Bits
Sampling Rate	5 Times / Second (200msec)
Maximum Rating	-2VDC minimum, 12VDC maximum
Input Characteristics	TypeRangeAccuracy @ 25°CInput ImpedanceJ-120°C  to 1000°C( -184°F to 1,832°F)±2°C2.2 MΩK-200°C to 1370°C (-328°F to 2498°F)±2°C2.2 MΩT-250°C to 400°C ( -418°F to  752°F )±2°C2.2 MΩE-100°C to 900°C( -148°F to 1652°F )±2°C2.2 MΩB0°C to 1820°C( 32°F to  3308°F )±2°C( 200°C to 1800°C )2.2 MΩR0°C to 1767.8°C( 32°F to 3214°F )±2°C2.2 MΩS0°C to 1767.8°C( 32°F to 3214°F )±2°C2.2 MΩN-250°C to 1300°C( -418°F to 2372°F)±2°C2.2 MΩL-200°C to 900°C( -328°F to 1652°F )±2°C2.2 MΩU-200°C to 600°C (-328°F to 1112°F)±2°C2.2 MΩP0°C to 1395°C( 32°F to 2543°F )±2°C2.2 MΩC0°C to 2300°C( 32°F to 4172°F )±2°C2.2 MΩD0°C to 2300°C( 32°F to 4172°F )±2°C2.2 MΩPT100(DIN)-200°C to 850°C( -328°F to 1562°F )±0.4°C1.3KΩPT100(JIS)-200°C to 600°C( -328°F to 1112°F )±0.4°C1.3KΩmA-3mA  to 27mA±0.05%2.5ΩVDC-1.3VDC to 11.5VDC±0.05%1.5MΩ
Temperature Effect	1.5µV /°C for all inputs except mA input, 3.0µV /°C for mA
Sensor Lead Resistance Effect	Thermocouple: 0.2 µV /Ω; 3-wire RTD: 2.6°C /Ω of Difference of Resistance of two leads 2-wire RTD: 2.6°C /Ω of Sum of Resistance of two leads
Burn-out Current	200nA
Common Mode Rejection Ratio(CMRR)	120 dB
Normal Mode Rejection Ratio (NMRR)	55dB
Sensor Break Detection	Sensor open for Thermocouple and RTD inputs, sensor short for RTD  input, below 1mA for 4-20mA input, below 0.25V for 1 – 5V input, not available for other inputs
Sensor Break Responding Time	Within 4 seconds for Thermocouple and RTD inputs, 0.1 seconds for 4-20mA and 1 – 5V inputs

Input

Digital Input (DI1 or DI2)
No. of Event Inputs	1
Logic Low	-10V minimum, 0.8V maximum.
Logic High	2V minimum, 10V maximum
Functions	Refer to user manual

Output

Analog Retransmission Output 1 /Output 2 /Output 3
Number of Outputs	3
Output Signal	4-20mA, 0-20 mA,0 – 10VDC

Specification

Resolution	15 Bits
Accuracy	±0.05% of Span ± 0.0025% / °C
Load Resistance	0 to 500Ω for current output, 10KΩ minimum for Voltage Output
Output Regulation	0.01% for full load change
Output Setting Time	0.1Second (stable to 99.9%)
Isolation Breakdown	1000VAC min
Integral Linearity Error	±0.005% of span
Temperature Effect	±0.0025% of span /°C
Saturation Low	0mA or 0VDC
Saturation High	22.2mA or 5.55V,11.1V min
Linear Output Ranges	0 – 22.2mA (0 – 20mA/4 – 20mA), 0 – 5.55VDC (0 – 5VDC, 1 – 5VDC),0 – 11.1VDC (0 – 10VDC)

Communication

Data Communication
Interface	RS-485
Protocol	Modbus RTU (Slave Mode)
Address	1 to 247
Baud Rate	Latching, Hold, Normal, Latching/Hold
Dwell Timer	0.1 to 4553.6 Minutes

Data Communication
Interface	RS-485
Protocol	Modbus RTU (Slave Mode)
Address	1 to 247
Baudrate	2.8KBPS to 115.2 KBPS
Parity Bit	None, Even or Odd
Stop Bit	1 or 2 Bits
Data  Length	7 or 8 Bits
Communication Buffer	160 Bytes

User Interface
Keypad	4 Keys
Display Type	4 Digit LCD Display
No of Display	2
Upper Display Size	0.58” (15mm)
Lower Display Size	0.3” (7.8mm)

User Interface
Keypad	4 Keys
Display Type	4 Digit LCD Display
No. of Display	2
Upper Display Size	0.31”(8mm)
Lower Display Size	0.25”(6.5mm)

Programming Port
Interface	Micro USB
PC Communication Function	Firmware upgrade

Digital Filter
Function	First Order
Time Constant	0,0.2, 0.5, 1, 2, 5, 10, 20, 30, 60 Seconds, Programmable
Environmental and Physical Specifications
Operating Temperature	-10°C to 50°C
Storage Temperature	-40°C to 60°C
Humidity	0 to 90 % RH (Non-Condensing)
Altitude	2000 Meters maximum
Pollution	Degree II
Insulation Resistance	20MΩ minimum(@500V DC)
Dielectric Strength	2000V AC,50/60 Hz for 1 Minute
Vibration Resistance	10 to 55 Hz , 10m/s2 for 2 Hours
Shock Resistance	200 m/s2(20g)
Dimensions (W*H*D) (mm)	22.5*96*83
Weight (grams)	160
Approval Standards
Safety	UL61010-1, CSA 22.2 No.61010-1-12, EN61010-1 (IEC1010-1)
Protective Class	IP66 for Panel, IP20 for terminals and housing, all indoor use
EMC	EN61326

For further information please contact : marketing@wmablog.com