Elgo Compact Position Controller P85,P87,P88 Series

Position Controller Elgo P85, P87, P88 Series

The single-axis controller of the Elgo P8511 series will be applicable to easy standard positioning tasks. An important feature is primary the easy structured function menu. It allows, quickly and comfortable, to set the target value and if necessary, a specific quantity of desired pieces in the batch counter window.

elgo

Target value, actual value, and quantity will be displayed on the front panel. All values and parameters can be programmed via a numeric keypad on the front. Additional keys start or stops the positioning procedure. Position Controller P8721 is identical to Elgo P8511 with an additional program memory of 200 different lines.  Position Controller P8822 is a 2 axes controller and fulfills except for few restrictions the whole functional range of Elgo P8721.

Three different kinds of output signals are available for the positioning:

  • Digital transistor outputs for frequency inverters
  • Potential free shutter relays for pole changing brake motors
  • PID-Analog output* for servo systems( *in preparation for P8822)

A 24 VDC- or 115 / 230 VAC-power pack is integrated into the unit. An optional serial interface allows data transmission and communication with a superior system.

Position Controller P85 Series

Product features:

  • Easy operating and handling
  • Manual operation mode
  • Relay- or digital outputs (+24 V-PNP) possible
  • PID-Analog output available (P85 and P87)

Standard functions:

  • Adjustable output signals (3 different speed rates)
  • Absolute – or incremental positioning
  • Datum value and gauging
  • Inch/mm – switchover
  • Pulse factor and multi-edge counter
  • Tolerance window
  • Incremental error compensation
  • Loop operation
  • Saw blade/tool compensation
  • Encoder monitoring
  • Batch counter (only P8511 and P8721)
  • Manual operation mode
  • Software end limit monitoring

Differences:

  • P8511 – Single-axis controller without program memory
  • P8721 – Single-axis controller with program memory
  • P8822 – Two axes controller with program memory

Applications

  • Woodworking machines
  • Bandsawing
  • Grinding machines
  • Plate shears
  • Fence
  • Break forming machines … and much more

Technical Data

Displays Red, 8mm high, 7 segment LED
Power supply 24 VDC, max. 200mA 115/230 VAC, max. 20 VA (unloaded status as de energizer relays)
Encoder supply 24 VDC, max. 130 mA
Connectors D-SUB– plug connectors or RIA-plug connectors
Accuracy of the system +/- 1 increment
Power down memory 10 years (EE-Prom)
Counting frequency 20 KHz
Operating temperature 0 – 50 °C
Store temperature 0 – 70 °C
Humidity Not condensing, max. 80 %
Altitude Max. 2000 m
Housing Black, metal panel housing
Dimensions of housing 144 x 144 mm
Cot out 138 x 138 mm
Install depth 75 mm83 mm with RIA-Connectors,

110 mm with D-SUB Connectors

Keypad Membrane keypad
Protection class IP 43 (installed status)
Inputs
Static input signals PNP (Option -EN: NPN ), 300ms Min. pulse time/ Pin, max.10 mA / input current / Pin(Start, Stop, reference, Incremental minus, Incremental plus, retract, fix position, batch counter up/down, End switch minus, End switch plus, Reset-System*)
Outputs
Output signals Push/pull, conditional short cut proofed, max. 10 mA output current, integrated recovery diodes  (at Option -R potential free shutter relays, max. 5 A at 230 VAC resp. max. 2 A at 24 VDC)(Speed signals, Position reached, Drive enable, Quantity reached, Reference run active, Manual mode, Single mode*)

Info lebih lanjut : marketing@wmablog.com

Tinggalkan Balasan

Please log in using one of these methods to post your comment:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout /  Ubah )

Foto Google

You are commenting using your Google account. Logout /  Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout /  Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout /  Ubah )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.